MedTech Videos on Sustainability

Our Insights

The Autoinjector Redesigned: Less Plastic, Lower Cost, Same Safety | John Palmer-Felgate

Over a billion autoinjectors are used every year. Almost all of them are single-use. Almost all of that plastic gets incinerated.

John Palmer-Felgate spent 30 years designing medical devices. At some ...point, he decided to actually fix the problem.

John is the Founder and CTO of Eco-Inject, a UK startup that has built a sustainable autoinjector from the ground up using 100% bio-based polymers, fewer components, and a completely rethought internal architecture.

*Here's what we get into:*
🞄 Why you can't just swap in sustainable materials and call it a day
🞄 How John reduced the device to five simple plastic moldings
🞄 Why the production line footprint is a quarter of the current standard
🞄 How Eco-Inject achieves a lower cost of goods and better sustainability at the same time
🞄 The commercial reality of selling sustainability to pharma procurement

*This episode is sponsored by Eco-Inject.*

*If you want to make your medical devices more sustainable, let's talk:* https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

*CHAPTERS: *
00:00 – Introduction
01:19 – John's background and what elegant design actually means
02:46 – Why patients drove single-use devices
05:31 – The design principles behind Eco-Inject
10:15 – Results: component count, cost, and sustainability
13:00 – The procurement problem
14:54 – Who will drive adoption?
23:55 – Bioplastics and the education gap
26:38 – NHS, ESG targets, and the regulatory push
32:11 – The startup story
40:44 – What's coming next
41:25 – Final advice

🔗 *CONNECT WITH JOHN PALMER-FELGATE:* https://www.linkedin.com/in/john-palmer-felgate/
🔗 *CONNECT WITH ECO-INJECT:* https://www.linkedin.com/company/eco-inject/posts/?feedView=all

🔗 *CONNECT WITH US:*
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#MedTechSustainabilityByDesignPodcast #GradicalPodcast #MedTech #AutoInjector #SustainableDesign #MedicalDevices #Bioplastics #DrugDeliveryShow More

The Autoinjector Redesigned: Less Plastic, Lower Cost, Same Safety | John Palmer-Felgate

CAPA Done Right: How to Turn Quality Firefighting into Continuous Improvement | Georg Digel

A lot of MedTech companies treat CAPA as a compliance exercise. They open a record, close a record, and survive the audit. Georg Digel has spent his career watching what ...happens when that's the only goal… and it's not pretty.

Georg is the Founder and Owner of Elevate CAPA. He has spent years helping MedTech companies build CAPA systems that actually work: ones that identify real problems, trace them to their root cause, and prevent them from coming back.

*Here's what we get into:*
🞄 Why CAPA is one of the most misunderstood processes in medical technology
🞄 The difference between a non-conformity and a CAPA
🞄 What auditors actually find when they inspect CAPA systems
🞄 Why "death by CAPA" happens and how to avoid it
🞄 How management culture makes or breaks the whole thing
🞄 What a lean, functional CAPA process looks like in practice

*CHAPTERS:*
00:00 – Introduction
01:00 – What is CAPA and why does it matter?
05:45 – When to open a CAPA vs. when not to
09:45 – What auditors actually find
11:56 – Corrective vs. preventive action
12:14 – Risk management and CAPA
20:35 – Hiring for quality mindset
24:00 – Change management and why "if it's compliant, don't fix it" kills improvement
25:11 – How to simplify your processes
28:38 – NC vs. CAPA: combined or separate?
33:57 – Making things actually get done
39:55 – Big company vs. small company
43:05 – Final advice

🔗 *CONNECT WITH GEORG DIGEL:* https://www.linkedin.com/in/georgdigel/?locale=de

🔗 *CONNECT WITH US:*
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#MedTechSustainabilityByDesignPodcast #GradicalPodcast #MedTech #CAPA #QualityManagement #MedicalDevices #ContinuousImprovement #QMS #ComplianceShow More

Remanufacturing Single-Use Medical Devices | Ulrike Marczak, CEO at Vanguard

This episode is brought to you by Vanguard, a company specializing in remanufacturing single-use medical devices to as-good-as-new condition.

A device labeled "single-use" gets thrown away after one patient. That makes ...sense for a syringe. It makes a lot less sense for a cardiac catheter that costs thousands of euros.

Ulrike Marczak is the CEO of Vanguard, a company that has been remanufacturing complex single-use medical devices for 30 years. They take used devices from hospitals, fully refurbish them, put their own CE mark on them, and send them back. Safe, legal, and up to 50% cheaper for the hospital.

*Here's what we get into:*
🞄 The difference between reprocessing and remanufacturing
🞄 Why remanufacturing makes sense economically, ecologically, and operationally for certain devices
🞄 How Vanguard tests every single device 100%
🞄 Which devices are good candidates, and where the business case breaks down
🞄 What OEM manufacturers should be thinking about when they design for the future

If you want to make your medical devices more sustainable, let's talk: https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

*CHAPTERS:*
00:00 - Introduction
01:00 - What does Vanguard actually do?
04:00 - Remanufacturing vs. reprocessing
06:00 - The economic case for hospitals
08:00 - Which devices make sense to remanufacture
13:00 - How the business model works
17:00 - Is it actually safe?
20:00 - Post-market surveillance and regulation
24:00 - How Vanguard sometimes finds issues the OEM missed
25:00 - Working with OEMs
30:00 - Design and material decisions that matter
33:00 - Electronics, hybrid devices, and complexity
36:00 - Ulrike's path to becoming CEO
42:00 - Final advice for the industry

🔗 CONNECT WITH ULRIKE MARCZAK:
Vanguard: https://www.vanguard.de/vanguard-ag/
LinkedIn: https://www.linkedin.com/in/ulrike-marczak-138045115/

🔗 CONNECT WITH US:
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#MedtechSustainabilityByDesignPodcast #GradicalPodcast #MedTech #CircularEconomy #SingleUse #Remanufacturing #MedicalDevices #Sustainability #HealthcareInnovationShow More

The Bio-Based Pipette at comparable costs to conventional Plastic | Bastien Manuel

YouTube Description
Bastien Manuel recognized that sustainability was inevitable for most medical plastic manufacturers. At elmplastic, he proactively established his business with that future in mind.

He's Commercial Director at ...elm-plastic GmbH, a Germany-based, family-owned converter of plastic and manufacturer of pharmaceutical plastic devices. In 2025, they launched what they believe is the only commercially available bio-based plastic oral dosing device on the market: a sustainable pharmaceutical pipette made exclusively made from bio-sourced materials. In this episode, he discusses their approach, how they achieved it, and why the cost argument against sustainable medical plastics is less compelling than most procurement teams believe.

*Here's what we get into:*
🞄 How eco-design can offset the higher price of bio-based raw materials
🞄 Why volume, scale, and long-term contracts change the equation entirely
🞄 How a family-owned business moves faster on sustainability than PE-backed competitors
🞄 Why early adopters of sustainable medical plastics are gaining a strategic market advantage now
🞄 An overview of the current regulatory requirements for pharmaceutical companies and what developments are expected next

*If you are a MedTech company struggling to make your devices more sustainable, let's talk:* https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

*CHAPTERS:*
00:00 Introduction
01:00 What elm-plastic does and their position within the pharma value chain
03:00 The inception of the bio-based pipette project
08:00 Qualifying materials for medical-grade applications
12:00 The cost debate: fossil-based versus bio-based materials
17:00 How eco-design approaches help closes the price gap
25:00 First mover advantage in sustainable MedTech
33:00 Importance of long-term contracts and supplier relationships
36:00 Customer feedback from CPHI and Pharma Pack
41:00Current and upcoming regulations affecting pharma
46:00 Recycling challenges and the chicken-and-egg dilemma
48:00 Bastien's advice for MedTech companies

🔗 *CONNECT WITH BASTIEN MANUEL:*
Website: https://elmplastic.com/de/
LinkedIn: https://www.linkedin.com/in/bastianmanuel/

🔗 *CONNECT WITH US:*
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#MedtechSustainabilityByDesignPodcast #GradicalPodcast #MedTech #MedicalDevices #Bioplastics #SustainableMedTech #Pharma #MedicalPlastics #SustainabilityShow More

How Advisory Boards Can Help You Make Strategically Sound Decisions | Jordan Morrison

*This episode is brought to you by Synera Advisory.*

Most MedTech founders sprint toward FDA clearance like it's the finish line. Jordan Morrison has an entire bookshelf of cleared devices that ...can't sell to prove it isn't.

She's Founding Partner at Synera Advisory, a physician-backed advisory group that works with founders from concept through commercialization. In this episode, she breaks down why so many MedTech startups burn through money and time building devices that nobody ends up buying.

*Here's what we get into:*
🞄 Why FDA clearance and a reimbursement strategy are two completely different things
🞄 The difference between physician founders and engineer founders, and where each gets stuck
🞄 How to assemble the right advisory team without wasting equity
🞄 Why US value analysis committees will kill your device if you can't make a financial case
🞄 The lean three-person board structure that can take you to Series A
FDA vs. MDR: which pathway actually makes sense for your device

*If you're a MedTech company struggling to make your devices more sustainable, let's talk:* https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

*CHAPTERS:*
00:00 - Introduction
01:00 - What does an advisory board actually do?
03:00 - Lowering the barrier to entry for MedTech startups
08:00 - Physician founders vs. engineer founders
12:00 - The most common avoidable mistake
17:00 - Reimbursement vs. regulation: why founders confuse the two
25:00 - FDA vs. MDR: which pathway is right for your device?
36:00 - How to assemble your advisory board
48:00 - The lean three-person board structure 51:00 - Jordan's advice for founders

🔗 *CONNECT WITH JORDAN MORRISON:*
https://www.linkedin.com/in/ajordanmorrison/
Synera Advisory: https://syneraadvisory.org/

🔗 *CONNECT WITH US:*
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#MedTechSustainabilityByDesignPodcast #GradicalPodcast #MedTech #MedicalDevices #MedTechStartup #FDAclearance #Reimbursement #AdvisoryBoard #CommercializationShow More

Recycling is Just an Extension of Linearity? | Patrick Zimmermann, MD at FKuR Kunststoff GmbH

*This episode is brought to you by FKuR Kunststoff GmbH, a leading developer and producer of bio-based and compostable plastic compounds.*

Patrick Zimmermann posts the same sentence on LinkedIn, and it ...always gets a reaction: "Recycling is just an extension of linearity."

He's the Managing Director at FKuR Kunststoff GmbH, a company that's been working with bio-based and compostable plastics for decades. So when he says recycling doesn't close the loop, he's not being cynical. He's being precise.

*Here's what we get into:*
🞄 Why every recycling diagram you've ever seen is leaving something out
🞄 Why "zero waste" runs into a physics problem
🞄 The difference between biodegradability and compostability
🞄 How bio-based materials can fill the gap recycling can't

*If you're a MedTech company struggling to make your devices more sustainable, let’s talk—BOOK A CALL HERE:* https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

*CHAPTERS:*
00:00 - Introduction
01:00 - What does "recycling is an extension of linearity" mean?
03:00 - Entropy, polymer degradation, and why nothing is truly circular
08:00 - Bioplastics explained: drop-ins, biodegradable, compostable
13:00 - Biodegradability vs. compostability
20:00 - Bio-based feedstocks
30:00 - Food vs. fuel vs. plastic
38:00 - The four drivers pushing companies toward sustainable materials
42:00 - Why the recycling industry is struggling right now
45:00 - Will bio-based plastics make it into the PPWR?
47:00 - Patrick's advice for navigating this space

🔗 *CONNECT WITH PATRICK ZIMMERMANN:*
FKuR Kunststoff GmbH: https://www.fkur.com
LinkedIn: https://www.linkedin.com/in/patrick-zimmermann-5a49588b/

🔗 *CONNECT WITH US:*
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#GradicalPodcast #CircularEconomy #Recycling #Bioplastics #Sustainability #PlasticsIndustry #PPWR #BiopolymersShow More

How to Build a Medical Device That Actually Sells | Lisa Voronkova, CEO of OVA Solutions

Most MedTech founders build the wrong device because they fell in love with their solution before they understood the problem.

Lisa Voronkova has watched this play out across 200+ medical device ...projects. As CEO of OVA Solutions and author of Hardware Bible, she's spent nine years helping founders avoid the mistakes that quietly kill products before they ever reach a patient.

*Here's what you'll learn in this episode:*
🞄 Why your first step should never be building a prototype
🞄 How to validate clinical need and business model before spending serious capital
🞄 What the six phases of medical device development actually look like in practice
🞄 Why FDA clearance is the starting line, not the finish line
🞄 How to think about manufacturing, supply chain, and documentation from day one
🞄 Where sustainability fits into the design process

If you're building a medical device and you want to avoid the expensive mistakes Lisa sees founders make over and over again, this one's for you.

If you're a MedTech company struggling to make your devices more sustainable, let’s talk—BOOK A CALL HERE: https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

⏱️ TIMESTAMPS:
00:00 – Introduction
01:07 – Why Lisa wrote Hardware Bible
04:22 – Step one: validate the problem, not the solution
05:13 – Who actually pays for your device (and why it matters early)
07:53 – The six phases of medical device development
10:42 – Lean startup methods in MedTech: where they work and where they don't
12:18 – Getting user feedback early without losing regulatory control
16:53 – Why FDA clearance is just an entry ticket
20:05 – Manufacturing, supply chain, and documentation from day one
33:40 – Orthopedics vs. wearables vs. surgical devices: what changes
43:05 – Lisa's one piece of advice for MedTech founders

🔗 *CONNECT WITH LISA VORONKOVA:*
OVA Solutions: https://ovasolutions.com/
LinkedIn: https://www.linkedin.com/in/lisa-voronkova/
Hardware Bible: https://www.amazon.com/Hardware-Bible-Medical-Device-Scratch/dp/B0FB4XL71K

🔗 *CONNECT WITH US:*
🎧 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Gradical: https://gradical.ch/
📩 Work with us: lucas.pianegonda@gradical.ch

#GradicalPodcast #MedTech #MedicalDevices #MedicalDeviceDevelopment #RegulatoryAffairs #MedTechStartup #FDA #HardwareDevelopmentShow More

How AI Can 10x Medical Device Development | Prof. Dr. Christian Johner

What if you could cut the time it takes to develop a medical device in half? Or do in one hour what used to take a full day?

In this episode, ...I sit down with Prof. Dr. Christian Johner, founder of the Johner Institut GmbH and one of Europe's most recognized experts in medical device, regulatory affairs and software. He has spent decades helping manufacturers navigate regulatory hurdles, and recently, he has turned his focus to something that is changing everything: generative AI and large language models in medical device development.

The discussion with Prof. Johner is precise, direct, and a little bit scary in how clearly he sees where this is all going.

*Here is what you will learn:*
🞄 Why AI is a multiplier for your competencies, but also your incompetencies
🞄 How to "tame" AI to produce precise, reproducible outputs with structured data
🞄 Why the biggest time losses in MedTech development have nothing to do with the development itself
🞄 The four competencies you need to actually use AI effectively in a medical devicecontext
🞄 Why Christian's #1 advice is simply: just start
🞄 His bold prediction that continuous device updates will replace the current regulatory gateway model entirely

If you work in MedTech and you are not yet using AI in your development process, this episode will change how you think about that decision.

*If you want to make your medical devices more sustainable, let's talk:* https://calendly.com/lucas-pianegonda-gradical/discovery-call-gradical

⏱️ *TIMESTAMPS:*
00:00 – Introduction
01:13 – Who is Christian Johner and what is the Johner Institute?
02:21 – Where is the biggest time loss in medical device development?
06:20 – What is generative AI and how does it work?
07:35 – Which tasks in MedTech can AI actually accelerate?
08:14 – Why some people get worse results with AI (and how to fix that)
13:38 – How to "tame" AI for precise, reproducible outputs
25:21 – The four competencies you need to use AI effectively
28:10 – AI as a multiplier: the widening gap between teams
29:12 – Societal implications: fascinated and scared at the same time
33:01 – The future of medical device development: continuous updates
38:56 – When regulation becomes code
39:56 – Concrete advice for 2026: where to start right now

🔗 *CONNECT WITH PROF. DR. CHRISTIAN JOHNER:*
Johner Institute: https://www.johner-institut.de
LinkedIn: https://www.linkedin.com/in/christianjohner/

🔗 *CONNECT WITH US:*
🎧 Subscribe to the Gradical Podcast for insights on MedTech materials and innovation
🟣 Apple Podcasts – https://podcasts.apple.com/us/podcast/gradical-podcast-the-podcast-about-plastics-in/id1773569554
🟢 Spotify – https://open.spotify.com/show/4vNQ6rPE2CQUGgQtEY3sYq
📺 YouTube – https://www.youtube.com/@GradicalGmbH
🌍 Learn more about Gradical: https://gradical.ch/
📩 Work with Lucas and the team: lucas.pianegonda@gradical.ch

#GradicalPodcast #MedTech #MedicalDevices #AI #GenerativeAI #MedicalDeviceDevelopment #RegulatoryAffairs #LLM #AIinHealthcareShow More

1 of 6